Luke Mud Walker's
Yale, Michigan
(810)-650-8641
Monday - Friday
10am-6pm

5 TON BASIC PARTS

***ALL PARTS RBC SELLS ARE FOR OFF ROAD USE ONLY***

CONTACT US AT 810-650-8641

ASK FOR: PARTS TO PLACE AN ORDER

OR

SERVICE FOR ANY QUESTIONS

DUE TO THE HIGH DEMAND FOR AFTER MARKET PARTS PLEASE CALL FOR AVAILABILITY

**ALWAYS HIT F5 ON YOUR KEY BOARD TO UPDATE OUR PAGES ON YOUR SCREEN**


5 TON ROCKWELL DRIVE FLANGE'S

   STOCK 16 SPLINE $125.00 EACH    

(USED-CLEAN & SAND BLASTED) THESE USE PAPER GASKETS

5 TON ROCKWELL FLANGE DISCONNECTS

THESE FLANGES HAVE THE SPLINES MACHINED OUT OF THEM SO WHEN DRIVING DOWN THE ROAD YOUR FRONT AXLE DOES NOT SPIN INTERNALLY

SANDBLASTED, PRIMED, AND PAINTED GLOSS BLACK

PAIR (2 OF THEM) FOR $350.00

5 TON ROCKWELL SPINDLE LOCK TAB

NEW LOCK TABS

$9.95 EACH

5 TON SPINDLE NUT

  OUTER 4 3/8" OCTAGON NUT

$12.95 EACH

INNER 4 7/8" OCTAGON NUT

$13.95 EACH

5 TON ROCKWELL

800 SERIES  

SPINDLE $195.00 EACH (USED TAKE OFF'S)

900 SERIES  

SPINDLE $225.00 EACH (USED TAKE OFF'S)

800 SERIES SHOWN IN PIC   

5 TON ROCKWELL

OUTER SOCKET 4 3/8" OCTAGON

$75.00 EACH NEW

INNER SOCKET 4 7/8" OCTAGON

$85.00 EACH NEW

5 TON ROCKWELL SPINDLE BUSHINGS

N.O.S. (NEW OLD STOCK)

FROM MILITARY WHOLESALE 

$35.00 EACH  

5 TON ROCKWELL

KING PIN UPPER BUSHING PLATES

(NEW)

$68.00 EACH

5 TON ROCKWELL

KING PIN PARTS

KING PIN LOWER BUSHING PLATES

(NEW) $68.00 EACH

5 TON ROCKWELL

KING PIN PARTS

KING PIN UPPER OR LOWER FLAT PLATES

(NEW) $40.00 EACH

5 TON ROCKWELL

KING PIN PARTS

KING PIN UPPER SHIM

(NEW) $5.00 EACH

SOME 5 TONS HAVE THE UPPER PLATE NOTCHED OUT FOR THE SHIM & SOME DONT USE THE SHIM, THEY JUST RUN A FLAT PLATE WITH NO NOTCH

**RBC RECOMMENDS RUNNING THE SHIM TO HELP CONTROL UP AND DOWN SLOP IN THE KNUCKLE, & STEERING PRE-LOAD. WITH YOUR TIE BAR OFF YOUR KNUCKLE SHOULD SELF CENTER IT SELF WITH THE NEW BOOT ON WITH ZERO UP & DOWN SLOP**

5 TON ROCKWELL STEERING

TIE BAR

STOCK (USED) $250.00 EACH

STOCK (NEW) $350.00 EACH

5 TON ROCKWELL

KNUCKLE CONVERTION BOLT KIT

AFTER MARKET TIE BAR ONLY

THESE RBC'S SPECIAL TAPERED BOLTS WILL ALLOW YOU TO RUN THE 1" X 1.25" DIAMETER HEIM JOINTS WITH 2" X .250" D.O.M. TUBE.

**YOU DONT HAVE TO MODIFY YOUR KNUCKLES**

SET COMES WITH

(2) RBC TAPERED BOLTS

(4) GRADE 8* 1" NUTS

(4) GRADE 8* 1" CONE WASHERS

$300.00 PER SET OF 2

5 TON ROCKWELL AFTER MARKET TIE BAR

COMES WITH (2) 1" X 1.25" HEIM JOINTS RH & LH / JAM NUTS/ BUNGS/ 2" OUTER DIAMETER D.O.M. TUBEING X .250" WALL THATS FULLY WELDED.

PLEASE SPECIFY

STANDARD LENGTH 5 TON (LONG SIDE/ SHORT SIDE)

SHORTENED 5 TON (SHORT SIDE/ SHORT SIDE)

$400.00 EACH

DONT LET THIS HAPPEN TO YOUR LOWER KING PINS !!!

5 TON ROCKWELL AFTER MARKET 

LOWER KING PIN SUPPORTS

(AS SHOWN IN PICTURE)

THIS HAS BOTH LOWER KING PIN SUPPORTS THAT REPLACE

THE FACTORY LOWER KING PIN BUSHING PLATE & BOTTOM FLAT PLATE ASSEMBLIES

5 TON ROCKWELL AFTER MARKET 

LOWER KING PIN SUPPORTS

(AS SHOWN IN PICTURE)

 

SEPERATE PARTS:

"CNC LOWER SUPPORTS" $400.00 EACH (YOU NEED 2 PER STEER AXLE)

"LOWER BOWL WELD ON BRACKETS" (NOT LOOSE TABS) 

3/8" PLATE WITH 1" X .250 WALL TUBE $75.00 EACH (YOU NEED 2 PER STEER AXLE)

RH/LH HEIM JOINTS: 1" X 1.25" WITH JAM NUT/WELD IN BUNG $37.00 EACH

GRADE 8* 1" CONE WASHERS KIT (8) $44.00 SET 

2" X .250 WALL DOM (MARKET PRICE AT TIME OF PURCHASE)

 5 TON ROCKWELL RH/LH KNUCKLES STOCK

800 TRUCK SERIES

STOCK (TAKE OFFS) $250.00 EACH

900 TRUCK SERIES

STOCK (TAKE OFFS)  $300.00 EACH

RBC 5 TON ROCKWELL

SHEET METAL KNUCKLES

**LIFE TIME WARRANTY**

THESE ARE 5/8" THICK STEEL PLATE THAT IS FULLY WELDED INSIDE & OUT. BUILT ON OUR AXLE JIG TO BE STRAIGHT AND TRUE. THEY COME AS A SET OF 2 (1 RH & 1 LH). THE STEERING ARM COMES WELDED ON IN THE STOCK POSITION AND USES THE  1" X 1 1/4" HEIM JOINT WITH (2) 1" CONE WASHERS FOR PROPER SPACING. STEERING ARM IS FULLY PLATED AND SUPPORTS THE TOP AND BOTTOM SIDES OF THE HEIM JOINT. IT USES A 1" BOLT.

(2) 5 TON SHEET METAL KNUCKLES WITH STEERING ARMS

$1,500.00 SET OF 2

ADDITIONAL PARTS KIT:

GLOSS BLACK PAINT

 2 BOOTS (YOUR COLOR OF CHOICE)

2 LARGE CLAMPS & 2 SMALL CLAMPS

2 UPPER KING PIN BUSHING PLATES

2 LOWER KING BUSHING PLATES

ALL THE GRADE 8* BOLT HARDWARE

$700.00 COMPLETE

**LIFE TIME WARRANTY COVERS THE KNUCKLE CONTRUCTION ONLY AGAINST BREAKAGE**

LIFE

TIME

 WARRANTY

5 TON ROCKWELL HUBS

STOCK 800 SERIES HUBS (TAKE OFF'S) $175.00 EACH

LOADED STOCK HUBS: CLEANED, SAND BLASTED, WITH NEW BEARINGS/RACES, NEW STUDS AND LUGS $475.00 EACH

5 TON ROCKWELL LUG STUDS & LUG NUTS

5 TON STOCK RH (ONLY) STUDS 

 $7.50 EACH

5 TON LONG STUDS RH (ONLY)

FOR 5/8" PLATE CENTER OR THICKER

$12.50 EACH

RH & LH LUG NUTS $3.00 EACH 

5 TON ROCKWELL AXLE TIP'S:

STOCK CONFIGURATION AXLE DROP (PINION SHAFT) IS ON DRIVERS SIDE

 AND TIE BAR BEHIND THE AXLE

 

THE CHUNK ON A STEER AXLE CAN BE ROTATED 180* DEGREES TO CENTER THE PINION SHAFT 

OVER THE LONG SIDE AXLE SHAFT WITH OUT ANY HOUSING MODIFICATIONS.

JUST PULL IT AND ROTATE IT AROUND

THE FACTORY KNUCKLES CAN BE PUT IN THE DRIVERS SIDE OR PASSENGER SIDE

WITH THE TIE BAR ON THE FRONT OR REAR SIDE OF THE AXLE

THE STEER OR STRAIGHT AXLE CAN BE PUT IN WITH THE PINION SHAFT FAVORING THE DRIVERS SIDE OR THE PASSENGER SIDE. THE TRUCK WILL GO FORWARD. THIS HAPPENS BECAUSE THE CHUNKS ARE A 4 GEAR SYSTEM AND THE UPPER PINION GEAR IS PINNED ON ONE SIDE (LARGE SIDE OF THE HOUSING)

TO MAKE A TRUCK REAR ENGINE YOU WILL NEED A REVERSER TRANSFER CASE

5 TON ROCKWELL (800 SERIES) MEASURMENTS

FACTORY STEER AXLE WIDTH: (WHEEL FLANGE TO WHEEL FLANGE)

HUBS FLIPPED OUT 87" WIDE

HUBS FLIPPED IN 77" WIDE

FACTORY STRAIGHT AXLE WIDTH: (WHEEL FLANGE TO WHEEL FLANGE)

HUBS FLIPPED OUT 83" WIDE

HUBS FLIPPED IN 73" WIDE

 

*ALL PRICE'S SUBJECT TO MARKET CHANGE*