Red Barn Customs, 2.5 Ton Rockwell Axles, Mud Boggers, CNC Plasma Cut, Yale Mich

RBC ROCKWELL YOKE'S & FLANGES

**ALL PARTS RBC SELLS ARE FOR OFF ROAD USE ONLY***

810-650-8641 SHOP LINE

ASK FOR PARTS OR SERVICE

WE NEED THE CORRECT INFO WHEN YOUR ORDERING ANY YOKE. PLEASE HAVE THE FOLLOWING INFO TO MAKE ORDERING FASTER.

EXAMPLE: NOT ALL 10 SPLINE NP 205 YOKES ARE THE SAME (NOT EVEN CLOSE)

1. SEAL SURFACE DIAMETER OF THE YOKE

2. OUTER SEAL DIAMETER OF THE STEEL PART OF YOUR SEAL

3. NUMBER OF SPLINES (INCLUDING ANY THICK MEMORY SPLINES)

4. LENGTH OF THE SPLINES THROUGH THE YOKE

5. MAJOR DIAMETER (VALLEY TO VALLEY)

6. MINOR DIAMETER (PEAK TO PEAK)

SCS FLANGES/YOKES

SCS 10 SPLINE 4 BOLT FLAT FLANGE (2.5 TON STYLE) IS $140.00 EACH

SCS 10 SPLINE 1410 YOKE FLANGE IS $135.00 EACH

SCS 10 SPLINE 1350 YOKE IS $185.00 EACH

SCS 8 BOLT FLAT FLANGE (5 TON STYLE $175.00 EACH)

***NOTE THESE FLANGES ARE A DIFFERANT 10 SPLINE, AND ALOT BIGGER IN THE MAJOR/MINOR SPLINE DIAMETER AND THEY DO NOT SEAL OIL LIKE THE STANDARD ROCKWELL FLANGES***

OUVERSON YOKES

OUVERSON 10 SPLINE 4 BOLT FLAT FLANGES

PROFAB T-CASE $125.00 EACH

THIS YOKE GOES INSIDE THE PROFAB CASE AND SEALS THE GEAR LUB FROM LEAKING OUT LIKE A STANDARD STYLE T-CASE

THESE ARE CNC STEEL BILLET

PROFAB T-CASE YOKES/FLANGES

5 TON PROFAB FLAT 8 BOLT FLANGE/YOKE

10 SPLINE X 1 3/4" SHAFT

THIS YOKE IS MACHINED TO FIT DIRECTLY INSIDE THE T-CASE AND SEAL THE GEAR LUBE FROM LEAKING OUT. YOU STILL NEED TO BOLT IT ON THE INPUT/OUTPUT SHAFTS

$225.00 EACH

DRIVE SHAFT ADAPTORS

FROM A 5 TON PINION YOKE TO A

2.5 TON DRIVE SHAFT

$175.00 EACH

FROM A 2.5 TON YOKE TO STEP UP TO A

5 TON DRIVE SHAFT

175.00 EACH

**NOTE** PLEASE SPECIFY WHEN ORDERING THESE ARE 100% OPPOSITE WHEN WE MACHINE THEM AND WILL NOT WORK GOING THE WRONG DIRECTION

PSC 2.5 TON ROCKWELL

HIGH STEER CLEARNCE YOKE

BRAND NEW YOKE TURNED DOWN

$50.00 EACH

PSC 5 TON ROCKWELL

HIGH STEER CLEARNCE YOKE

BRAND NEW YOKE TURNED DOWN

$100.00 EACH

2.5 TON ROCKWELL

STANDARD 10 SPLINE 4 BOLT FLAT FLANGE $50.00 EACH

(THIS 10 SPLINE FLANGE IS FOR THE 2.5 TON PINION SHAFT & ROCKWELL T-136 TRANSFER CASE ONLY)

DRIVE SHAFT END 1410/FLAT FLANGE COMBO $50.00 EACH

5 TON ROCKWELL

STANDARD 10 SPLINE 8 BOLT FLAT

FLANGE $125.00 EACH

(THIS 10 SPLINE FLANGE IS FOR THE 5 TON PINION SHAFT ONLY)

2.5 TON DRIVE SHAFT END & ADAPTOR /FLAT FLANGE COMBO

$275.00 EACH

SCS 8 BOLT FLANGE SHOWN IN PIC. THE ONE WE SELL IS A NEW OLD STOCK (N.O.S.) PART

WE CUSTOM MAKE FLAT FLANGE YOKES FOR YOUR TRANS OR TRANSFER CASE. WE USE YOUR EXSISTING PART, CUT DOWN A BRAND NEW GREEN FLAT FLANGE, MACHINE THE TWO OF THEM TO PRESS TOGETHER, JIG THEM UP STRAIGHT, THEN WELD THEM UP. THE AVERAGE YOKE IS $150.00 EACH

THIS WAY YOU ELIMINATE THE 2 SMALL STRAPS AND THE 4 SMALL LITTLE BOLTS AND STEP UP TO 1/2" GRADE 8* BOLTS THAT TAKE ALOT MORE FORCE TO SHEER OFF.

NP 200

2.5 TON ROCKWELL 4 BOLT FLAT FLANGE 10 SPLINE FOR NP 200

$150.00 EACH PLUS YOUR OLD YOKE FOR A CORE

5 TON ROCKWELL 8 BOLT FLAT FLANGE FOR 10 SPLINE NP 200

$175.00 EACH PLUS YOUR OLD CORE

IF YOU DONT HAVE A CORE ADD $25.00 EACH

***RBC WANTS TO BUY OLD NP 200 YOKE'S OF ANY KIND, THEY CAN EVEN BE BROKEN ON THE FLANGE EARS, MUST HAVE GOOD SPLINES AND SEAL SURFACE CALL FOR $$ DETAILS***