RBC Is Proud To Announce That We Are Michigans Largest Ouverson Engineering & Machine's Largest Vender

THE GANG-GREEN-CHARGER RUNS RANDY OUVERSON'S 2" 47 SPLINE GUN DRILLED SHAFTS, VIOLATER U-JOINTS, & 2 STUD GIRDLES. IF YOUR GOING TO RUN HIGH HORSE POWER AND LARGE TIRES THIS IS THE ONLY WAY TO GO.........LUKE MUD WALKER

WE ARE AN AUTHORIZED DEALER FOR OUVERSON ENGINEERING PRODUCTS O.E.M.

STOCK 16 SPLINE FRONT AXLE                                                                            $1000.00

STOCK 16 SPLINE SHORT SIDE INNER SHAFT                                                        $300.00

STOCK 16 SPLINE LONG SIDE INNER SHAFT                                                          $400.00

STOCK 16 SPLINE STUB OUTER SHAFT                                                                  $150.00

REAR AXLE SHAFT 16 SPLINE                                                                                $205.00

DRIVE FLANGES FOR FRONT/REAR 16 SPLINE AXLES      $165.00 EACH OR $330.00 PAIR

DRIVE FLANGE "O" RINGS FOR 16 OR 47 SPLINE AXLES $2.50 EACH

LOCKER 16 SPLINE                                                                                                $485.00

SPOOL 16 SPLINE                                                                                                  $302.50

LOCK OUT HUB SET   FOR 16 SPLINE AXLES                                                         $595.00

2" 47 SPLINE FRONT AXLE CONVERSION                                                             $2250.00

GUN DRILL FRONT 2" SHAFTS                                                                                $300.00

2" 47 SPLINE SHORT  SIDE INNER SHAFT                                                              $350.00

2" 47 SPLINE LONG SIDE INNER SHAFT                                                                 $450.00

2" 47 SPLINE OUTER STUB SHAFT                                                                         $225.00

2" 47 SPLINE SPECIAL LENGTH SHAFTS PLEASE CALL FOR PRICING 866-787-0629 LUKE

2" BUSHINGS                                                                                                           $14.25

2" SEAL RETAINER                                                                                                  $55.00

2" 47 SPLINE DRIVE FLANGES                                              $175.00 EACH/ $350.00 PAIR

2" 47 SPLINE FULL SPOOL                                                                                    $550.00

2" 47 SPLINE LOCKER                                                                                           $550.00

OEM PINION BRAKE  (WILL NEED CLOCKING POSITION)                                      $465.00

OEM DRIVE LINE BRAKE (WILL NEED CLOCKING POSITION)                               $465.00

8 BOLT HUBS EACH                                                                                              $475.00

8 BOLT 6 PISTON CALIPERS EACH                                                                       $650.00

We Can Get You Any OEM Product That Is'nt Listed Call 1-866-787-0629

2.5 Ton Rockwell

Stock 16 Spline U-Joint Axle Shaft Assemblies (This Includes Outer Stub Shaft, U-Joint, & Inner Shaft)

Used (U-Joint Only) Short Or Long Side $240.00 Each

Used (Burfield Or Rezeppa) Short Or Long Side $200.00 Each ...Only When We Have Take Outs From Our RBC Deluxe Axles. Call For Details

Used Rear Axle Shaft 16 Spline Stock  $90.00 Each

5 Ton Rockwell

Stock 16 Spline Axle Shaft Assemblies (This Includes Outer Stub Shaft, U-Joint, & Inner Shaft)

Used Long Or Short Side U-Joint  $595.00 Each

Used Long Or Short Side Rezeppa   $580.00 Each

Used Long Or Short Side Burfield/Bendix $425.00 Each

Used Rear Axle Shaft 16 Spline Stock $200.00 Each

NEW Military Grade U-Joints Recommended For Stock Axle Shafts. These U-Joints Are Solid Non-Greaseable Replacement Provided With 4 New Out Side Clips.

$65.00 Each

NEW Heavy Duty U-Joints. These Are Recommended For Stock Axle Shafts Or Ouverson Chrome Moly 16 Spline Axle Shafts. These Are Greaseable With Needle Bearings And The Newest Design In Rubber Seals To Help Keep Mud And Water Out. They Come With 4 New Out Side Clips

$69.00 Each

Ouverson's "VOLATOR JOINT" Are The Strongest U-Joints On The Market. They Are Rebuildable With Brass Bushings Instead Of Needle Bearings, Neopreme O-Ring Sealed, Fully Greaseable. These Are Recommended For The Ouverson Crome Moly 16 Spline And The Ouverson 2" 47 Spline Axle Shafts. I Personally Run These In The "Gang-Green- Charger"

$325.00 Each

Chunk Bearings, Seals & Gaskets

NEW Pinion Yoke Seals $13.00 Each

NEW Pinion Steel Shim Pack $20.00 Each

NEW Top Plate Gasket (Rectangle Shape) On The Chunk $5.00 Each

NEW Side Plate Gasket (Diamond Shape) On The Chunk $5.00 Each

NEW Chunk Base Gasket (Round) Goes Between The Chunk & Housing $11.90 Each

NEW Carrier Bull Gear Side Bearings

W/Race $44.00 Each

NEW Large Pinion Bearing W/Race $52.50 Each

NEW Small Pinion Bearing W/Race $39.50 Each

NEW Center Shaft Gear Bearing $162.50 Each

NEW Small Double Bearing W/Race Combo

(2 Bearings/2 Races) $89.50 Set

 Used TAKE OUT CHUNKS $350.00

ROCKWELL 2.5 TON DRIVE SHAFT PARTS

LARGE FLAT 4 BOLT PLATES FOR THE #1410 U-JOINT, THAT BOLTS DIRECTLY UP TO YOUR 2.5 TON TOP LOADER PINION FLANGE $50 EACH (3 INSTOCK ALWAYS)

CALL FOR OTHER YOKE AVAILABILTY.................... MANY TO CHOOSE FROM

WE CAN BUILD YOUR COMPLETE DRIVE SHAFT READY TO DROP IN, WE SELL A BALANCED AND NON BALANCED VERSONS FOR YOUR TRUCK.

YOKES, FLANGES, DRIVE SHAFT PARTS, TUBES, WELD YOKES, SLIP YOKES, OF ALL KINDS FOR YOUR NP 205, NP 200, PRO FAB, SCS DROP BOXES, OR WHAT EVER MODEL JUST CALL RBC FOR WHAT YOUR LOOKING FOR.

1350 SERIES 10 SPLINE FOR (NP200) YOKE W/STRAPS & BOLT KITS $120.80 EACH

1410 SERIES 10 SPLINE FOR (NP200) YOKE W/STRAP & BOLT KITS $85.00 EACH

1410 SERIES 10 SPLINE FOR (Most NP 205's) YOKE W/ STRAPS & BOLT KITS $85.00 EACH

1410 SERIES 10 SPLINE FOR (RARE NP 205) YOKE $85.00 Plus $10.00 For Strap Kit Please Call For Measurements

1410 SERIES 30 SPLINE FOR (NP205) YOKE W/STRAP & BOLT KITS (NLA) @ This Time

1410 SERIES 32 SPLINE FOR (NP 205) YOKE W/STRAPS & BOLT KITS $92.37 EACH

1410 SERIES 32 SPLINE SLIP YOKE FOR (NP 205 & NP 208) $101.47 EACH

FLAT 4 BOLT FLANGE (ROCKWELL 2.5 TON PATTERN) YOKE FOR THE (NP 200) $125.00 EACH Plus Your Old Yoke For A Core

FLAT 4 BOLT FLANGE (SMALL PATTERN) YOKE FOR THE  (NP 205) $140.00 EACH

THERE ARE MANY YOKES THAT LOOK VERY SIMILAR TO EACH OTHER. WE ASK THE FOLLOWING QUESTIONS ABOUT YOUR YOKE BEFORE WE ORDER THEM IN AND SHIP THEM OUT TO YOU. PLEASE USE A SET OF CALIPERS (DIGITAL OR STANDARD) IS FINE.

1. HOW MANY SPLINES ARE THEIR

2. IS THEIR A THICK MEMORY SPLINE

3. HOW LONG ARE THE SPLINES

4. MEASURE THE SPLINES FROM PEAK TO PEAK @ 9 & 3 O'CLOCK POSITION

5. MEASURE THE SPLINES FROM VALLEY TO VALLEY @ 9 & 3 O'CLOCK POSITION

6. MEASURE THE SEAL SURFACE DIAMETER OF THE YOKE

7. MEASURE THE OUTSIDE SURFACE OF THE SEAL'S METAL CASE. SOME TIMES WE CAN GET YOUR YOKE BUT HAVE TO CHANGE THE SEAL TO MATCH.

CUSTOM CNC YOKES AVAILIBLE CALL FOR DETAILS

1-866-787-0629

We Now Have Brand New 2.5 Ton Rockwell 4 Bolt Flat Plate Pinion Yokes And 4 Bolt Flat Plate Pinion Flanges For the 1410 U-Joints In Stock.

NEW Pinion Yoke W/Dust Shield $50.00

NEW Yoke That Is Machined Pinion Yoke For PSC High Steering System $115.00 

NEW 1410 U-Joint Small Flat Plate Flange For Drive Shaft $45.00 (W/2Clips)

NEW Spindle Lock Tabs $5.85 Each

NEW Spindle Octagon Nuts $6.50 Each

NEW Spindle Bushings $14.25 Each

Used Front Spindles Sand Blasted $120.00 Each

Machine Front Spindles To Accept 2" OEM Shafts $75.00 Each

Machine Rear Spindles To Accept 2" OEM Shafts

Includes: Cut Off Ends Of Housing, Trim Down Large Round Brake Backing Plate, Straighten Out Housing (This Will Free Up More HP @ The Wheels For Less Resistance) Also Includes Power Wash & Sandblast. $300.00

2.5 Ton Rockwell Steering Knuckles (USED STOCK TAKE OFFS)

$175.00 Each Side (Right Or Left)

To Determine Which Knuckle That You Need This Is How We Can Tell What Side That You Actually Have On Your Axle.

The Stock Steer Axle When It Was In The 6x6 Truck Has The Short Side On The Passenger Side And The Tie Bar Is Behind The Axle.

If You Would Like Us To Degrease, Power Wash, Sand Blast, Prime And Paint Your Parts Please Call For Details.

2.5 Ton Rockwell Re-Inforced (WRAPPED) Steering Knuckles With A 1" Hole For Your Steering Tie Bar $450.00 Each Side 

2.5 Ton Rockwell Complete HD Wrapped Knuckle Kit:

Includes RH And LH Wrapped Knuckles, 2" DOM Tube (.250 Wall), RH And LH 1" x 1 1/4" Chrome Moly Heim Joints, Nuts, And Welded Bungs, 1" Grade 8* Bolts, Washers, Nuts.     $1200.00 For The Complete Kit

Please Specify Your Axle Configuration For Proper Tie Bar Length

1. Long Side/ Short Side

2. Short Side/ Short Side

3. Long Side/ Long Side

Ouverson 16 Spline Ultra Locker $485.00 Each

Detroit 16 Spline Locker $470.00 Each

Ouverson 16 Spline Spool $302.50 Each

Ouverson 47 Spline Locker $500.00 Each

Ouverson 47 Spline Spool $500.00 Each

RBC "Welded" Spider Gear Set Up $200.00 Each

2.5 Ton Axle Shaft Seal & Seal Holder For U-Joint Type Axles. This Is What You Need To Update Your Exsisting Housing From The Older Style Ball Shafts. They Are Ready To Install Into Your Housing Tube Ends.

NEW 2.5 Ton Axle Shaft Seal With Seal Holder For U-Joint Axle Shafts $39.70 Each

NEW  2.5 Ton Axle Shaft Seal $10.00 Each

LUGS AND STUDS

NEW 2.5 Ton/ 5 Ton Right Hand Lug Nuts (Front Style) $2.50 Each

NEW 2.5 Ton/ 5 Ton Left Hand Lug Nuts (Front Style) $2.50 Each

NEW 2.5 Ton/ 5 Ton Right Hand Lug Studs $6.00 Each

NEW 2.5 Ton/ 5 Ton Left Hand Lug Studs $6.00 Each

RBC is proud to anounce that we are the 1st shop on the net to sell the bright red and bright blue dust boots.

Blue Silicone Boot $32.00

Red Silicone Boot $32.00

COMING SOON: 2.5 Ton

Green Silicone Boot $32.00

Orange Silcone Boot $32.00

NEW Black Rubber 1 Piece Boots $24.00 Each

NEW Yellow Silicone 1 Piece Boots $32.00 Each

NEW Black Rubber Zipper Boots $25.00 Each

New Large Clamps W/Nut & Bolt $9.00 Each

New Small Clamps W/Nut & Bolt $8.00 Each

NEW 2.5 Ton Outer Wheel Bearing Seal $10.50 Each

NEW 2.5 Ton Inner Wheel Bearing Seal $11.00 Each

NEW 2.5 Ton Inner Hub Wheel Bearing  $35.00 Each

NEW 2.5 Ton Outer Hub Wheel Bearing $35.00 Each

NEW 2.5 Ton Inner/Outer Bearing Races $11.50 Each

5 TON ROCKWELL BOOTS:

Zipper Boot                            $32.00 (4 Sets In Stock Today)

COMING SOON 1 PIECE SILICONE BOOTS

RED SILICONE                      $38.50

BLUE SILICONE                     $38.50

YELLOW SILICONE                $38.50

BLACK SILICONE                   $38.50 (6 Sets In Stock Today)

RBC Remand 2.5 Ton Steer Axle Assembly, This Unit Is Completely Torn Down, Power Washed, SandBlasted, Primed With 2 Part Epoxy Primer, Painted Your Choice Of Color. U-Joint Axle Shafts,New Black Or Yellow Boots, All New Seals And Any Bearings That Need Replacement. Drum Brake Removed. We Will Flip The Hubs Either Direction That You Would Like. We Will Install A Locker,Spool, Or A Welded Set In It If You Buy Them From Us. These Axles Are Built For The Custom Order Only. $1500.00 Each.

We Can Do The Same For The Rear Axle $1000.00

If You Purchase 2 Axles And Would Like All New RH Lugs & Studs Please Add $200.00

We Can Also Install 2" Upgrades In A 2.5 Ton Rockwell Steer Or Straight Axle Please Call For Pricing.

RBC Stock 2.5 Ton Rockwell Take Out Set Of Axles, 1 Steer/1 Straight With Drum Brakes $1500.00

ATTENTION: ROCK CLIMBERS & TRAIL RIGGS

RBC HAS A 2 STEER AXLES SET INSTOCK THAT HAS BEEN MODIFIED, BOTH LOWER BOWLS ARE SHAVED & MOHAWKED, ALL 4 HUBS HAVE BEED CONVERTED SO THEY ARE FLIPPED IN WARDS, YOUR CHOICE OF CENTER SECTION POSITIONING EITHER (FLIPPED OR STRAIGHT STOCK ON THE CHUNK DIRECTION), STOCK 16 SPLINE U-JOINT AXLE SHAFTS, NEW BOOTS (5 Styles To Choose From), NEW SEALS, 4 New Large Clamps, 4 New Small Clamps,NEW GASKETS, REPACKED BEARINGS, HOUSINGS HAVE BEEN POWER WASHED (INSIDE/OUT), SANDBLASTED, 2 PART EPOXY PRIMED, PAINTED GLOSS BLACK (OR YOUR COLOR OF CHOICE). WE WILL EVEN INSTALL A TRACTION DEVICE FOR A SMALL FEE IF YOU BUY IT (LOCKER, SPOOL, WELDED CARRIER) THROUGH RBC. THIS SET IS CUSTOM BUILT FOR YOU TO BE PUT UNDER YOUR TRUCK.

$4000.00 PLEASE CALL FOR MORE DETAILED INFO

WE CAN EVEN UPGRADE YOUR AXLE SHAFTS TO AFTER MARKET OUVERSON'S SUPER 16 SPLINES OR 2" 47 SPLINES)

5 Ton Rockwell Parts. For Any Parts That You Need Please Call For A Price Quote 1-866-787-0629