NOTE: "ANY BRAND COIL OVER SHOCK IS BASED ON TRAVEL OF THE SHOCK, NOT LIFT. "

 EXAMPLE A 16" BIG SHOCK BONZI IS 43 1/2" IN LENGTH

BOLT EYE TO BOLT EYE AT FULL EXTENDSION"

EVERY TRUCK'S RIDE HEIGHT WILL VARY DUE TO WEIGHT AND SET UP

***ALL COIL OVER SHOCKS REQUIRE THE FOLLOWING***

BUMPSTOPS...LIMIT STRAPS...SWAY BARS FRONT & REAR

************

THIS IS FOR SAFETY AND THE BEST RIDE AND THE LONGEST LIFE

WITH OUT THE FOLLOWING ADDITIONAL PARTS THIS IS WHAT HAPPENS

1. (NO BUMP STOPS) SHOCKS BOTTOM OUT, CAUSING SEVERE DAMAGE TO THE SHOCK & TRUCK

2. (NO LIMIT STRAPS) SHOCKS HYPER EXTEND OUT, CAUSING SEVERE DAMAGE TO THE SHOCK & TRUCK

3. (NO SWAY BARS) EXTREME BODY ROLL SIDE TO SIDE & TRUCK FLIPS OVER/DRASTIC DAMAGE

"BIG SHOCKS"

COIL OVER SHOCKS

PROUD TO BE HAND CRAFTED 100% IN MICHIGAN

BY JARROD WARNER & CREW

***THESE SHOCKS ARE OUR BEST SELLING SHOCKS***

STANDARD BIG SHOCK: 2.25" SERIES SHOCK: 

THESE ALL HAVE A 3/4" STAINLESS STEEL RODS & BILLET ALUNIMUM CYLINDERS

AVAILIBLE IN 10", 12", 14", & 16" TRAVEL 

ALL SHOCKS REQUIRE 2 SPRINGS EACH

ALL STANDARD SHOCKS $225.00 EACH

 ALL SPRINGS RANGE FROM  $65.00 EACH TO $130.00 EACH

DEPENDS ON SPRING LBS RATE

(4) SHOCKS ARE $900.00

(8) SPRINGS W/2.50" DIAMETER

(16) 5/8" TO 1/2" HIGH MISALIGNMENT SPACERS $48.00

UPS 3 DAY GROUND SHIPPING OF 4 SHOCKS & 8 SPRINGS TO ANY WHERE IN THE LOWER 48 STATES IS $118.45

CALL TODAY TO ORDER YOUR COMPLETE SET OF SHOCKS & SPRINGS.

WE SHIP THEM UPS TO YOUR DOOR

 CALL 810-650-8641 ASK FOR PARTS OR SERVICE

PLEASE ALLOW 3 WEEKS FOR CUSTOM BUILD TIME

***THESE ARE AN ENTRY LEVEL 4 LINK SHOCK AND NOT MADE FOR JUMPING*** 

**** AVAILIBLE IN BLUE SPRINGS ONLY****

BONZI W/EXTERNAL RESIVOIR BIG SHOCK:

 2.25" SERIES SHOCK: 

THESE ALL HAVE A 1.00" STAINLESS STEEL RODS & BILLET ALUNIMUM CYLINDERS

AVAILIBLE IN 10", 12", 14", & 16" TRAVEL 

ALL SHOCKS REQUIRE 2 SPRINGS EACH

ALL BONZI-SHOCKS $375.00 EACH

 ALL SPRINGS 2.50" DIAMETER RANGE FROM $65.00 EACH TO $135.00 EACH

***DEPENDS ON SPRING LBS RATE***

HILL-N-HOLE UP GRADES-MADE FOR JUMPING

***CALL TODAY TO FIND OUT HOW TO UP GRADE YOUR SPRINGS/HARDWARE***

***TO THE NEW SUPER 3.00" DIAMETER SPRINGS***

***NOTE: THIS HAS TO BE DONE APON PURCHASE OF NEW SHOCKS***

AND GO ALL OUT AND ADD THESE NEXT TO YOUR BONZI SHOCKS

"I WILL BE RUNNING THESE ON THE GANG-GREEN CHARGER"

"LANDING GEAR" SHOCK ABSORBERS. THESE ARE BUILT TO RUN ONLY SIDE BY SIDE WITH THE BONZI SHOCKS. THESE WILL REALLY SOAK UP HARD LANDINGS AND HELP SAVE YOUR TRUCK.  

LANDING GEAR SHOCKS: $275.00 EACH X 4 = $1100.00 PLUS SHIPPING

SCOTT "THE KING OF SLING" SWEAT ........RUNS THESE ON HIS NEW TRUCK

(4) BONZI SHOCKS ARE $1500.00

(8) SPRINGS W/2.500" DIAMETER STANDARD OR 3.00" UPGRADE (CALL)

(16) 5/8" TO 1/2" HIGH MISALIGNMENT SPACERS $48.00

UPS 3 DAY GROUND SHIPPING OF 4 SHOCKS & 8 SPRINGS TO ANY WHERE IN THE LOWER 48 STATES IS $138.50

PLEASE CALL TO ORDER YOUR COMPLETE SET OF SHOCKS & SPRINGS TODAY.

 ALLOW 2 TO 3 WEEKS TIME, FOR THEM TO BE SHIPPED TO YOUR DOOR.

 810-650-8641 SHOP LINE

ASK FOR PARTS OR SERVICE

***THESE HAVE CUSTOM MADE PISTONS AND SPECIAL VALVING FOR THE HILL-N-HOLE STYLE RACING***  

****AVAILIBLE IN BLUE SPRINGS ONLY****

SCS SWAY BAR KITS

KIT #1: (2 SWAY BARS).... (1) 2 1/8" DIAMETER FOR THE ENGINE END OF TRUCK & (1) 1 3/4" DIAMETER . BOTH BARS ARE SPLINED & THREADED ON THE ENDS FOR OPTIMUN ARM CLOCKING POSITIONS. THIS ALSO COMES WITH 4 MOUNTING BLOCKS FOR THE FRAME, & 4 TUBE SLEEVES TO MAKE YOUR OWN ARMS (NO LINK RODS OR TABS INCLUDED FOR KIT)

$1400.00 PLUS SHIPPING

KIT #2: SAME AS ABOVE BUT INCLUDES (4) ARMS THAT YOU CAN CLOCK IN ANY POSTION

(ADD $375.00 PER ARM OR $1500.00 FOR 4) 

SWAY BARS ARE AVAILIBLE UP TO 44" IN LENGTH

ARM LENGTH- CHOICE OF SEVERAL LENGTHS

CALL 810-650-8641

ASK FOR PARTS OR SERVICE

WE CAN BUILD YOU ANY TYPE OF LINK RODS/TABS/LIMIT STRAPS/BUMP STOPS

THESE ARE THE SCS SPLINED FEMALE ENDS FOR THE SWAY BAR ARMS. THESE WELD INTO THE SWAY BAR ENDS. THEY ARE 100% CLOCKABLE AND ARE MADE FOR THE 2 1/8" AND/OR 1 3/4" SWAY BARS. JUST THE SAME AS MOST MONSTER TRUCKS. THESE PARTS ARE 3" WIDE AND ARE FOR THE SEROIUS SWAY BAR ARM

*ALL PRICE'S SUBJECT TO MARKET CHANGE*