RBC 2.5 TON ROCKWELL HELMETS

FULLY REMOVABLE & FULLY WELDED 3/8" STEEL PLATE

STANDARD HELMET $150.00 EACH

DELUXE HELMET WITH 4" OVER HANG ON THE 6 BOLT OR 4 BOLT DIAMOND SIDE $175.00 EACH

THIS DELUXE HELMET HELPS YOU BRING THE TOP 4 LINK BARS CLOSER TO THE MIDDLE OF THE TRUCK

UP GRADE TO 1/2" STEEL PLATE ADD $25.00 EACH

RBC 5 TON ROCKWELL HELMET

STANDARD HELMET $175.00 EACH

DELUXE HELMET FAVORING OVER HANG ON 6 BOLT SIDE OR SMALL COVER SIDE $195.00 EACH

UP GRADE TO 1/2" STEEL PLATE ADD $25.00 EACH

RBC WELD ON HELMET TABS

CHOICE OF 1/2", 5/8", 3/4", OR 1" HOLE

3/8" STEEL PLATE $7.50 EACH OR $30.00 FOR 4

UP GRADE TAB STEEL TO 1/2" PLATE

$10.50 EACH OR $42.00 FOR 4

HEIM JOINTS KITS 1" BOLT HOLE X 1.25" SHANK (NON-GREASE-ABLE)

(RIGHT OR LEFT HAND THREADS)

COMES WITH HEIM/JAM NUT/WELD IN BUNG FOR 2.00" D.O.M. TUBE $48.00 EACH

HIGH MIS-ALIGNMENT SPACERS FOR THESE (DROP BOLT SIZE DOWN TO 3/4"

$7.00 EACH X 2 PER HEIM ($14)

SO IT WOULD BE $224.00

FOR 32 MISALIGNMENT SPACERS

16 HEIMS ONLY $768.00 SET

16 HEIMS AND 32 MIS ALIGNMENTS $992.00 SET

WTGH SUPER-FLEX JOINT

(GREASE-ABLE & REBUILD-ABLE)

COMES WITH BUILT IN HIGH MIS-ALIGNMENT SPACERS

BOLT HOLE CHOICES ARE

 9/16" OR 5/8" (MORE TO COME)

JAM NUT AND WELD IN BUNG FOR 2" D.O.M. TUBE INCLUDED

PLEASE SPECIFY RIGHT OR LEFT HAND

$85.00 EACH OR $1360.00 FOR 16

I'M GOING TO RUN THESE ON GANG GREEN CHARGER SOON....

RBC 5" LIFT BRACKETS

THESE ARE PERFECT FOR YOUR BIG SHOCKS

STANDARD WITH 3/8" STEEL PLATE FULLY WELDED

FOR THE COIL OVER SHOCKS. THESE WELD ONTO THE TOP SIDE OF THE AXLE TUBE ON 2.5 TON OR 5 TON ROCKWELL AXLES

THESE COME WITH A 2", 1.5", & 1" (.120 WALL D.O.M. TUBES) WELDED IN

PLEASE SPECIFY SHOCK BOLT HOLE SIZE AND GAP BETWEEN SIDE PLATE $125.00 EACH OR $500.00 FOR 4

UP GRADE EACH BRACKET $10.00 FOR 1/2" PLATE

RBC 2.5 TON & 5 TON ROCKWELL

LOWER AXLE HANGER BRACKET

THESE ARE FOR HEIM JOINT TYPES

PLEASE SPECIFY BOLT HOLE SIZE AND GAP BETWEEN PLATES

2.5 TON $75.00 EACH

5 TON $85.00 EACH

3/8" OR 1/2" STEEL PLATE WITH 2" DOM .120 WALL TUBE WELDED IN BETWEEN

RBC LIMIT STRAPS & BRACKETS

LIMIT STRAPS ARE QUAD WRAPPED & RENFORCED STITCHED, THEY STOP THE SHOCK FROM HYPER EXTENDING CAUSING IT TO RIP IN HALF BENDING THE ROD AND DESTROYING THE ENTIRE SHOCK. NO BRANDS WARRANTY THIS

STRAPS FROM 12" TO 40" LONG $34.95 EACH

3/8" STEEL BRACKETS WITH 1/2" HOLE $6.50 EACH 

RBC CUSTOM BRACKETS

RBC BUILDS ALL TYPES/KINDS OF BRACKETS FOR THE CRADLE AND FOR THE UPPER SHOCK MOUNTS BRACKETS ON THE FRAME BUT THESE ARE ALL SPECIAL BUILDS. WE WILL NEED A THIN CARD BOARD PATTERN OF ACTUAL SIZE TO BUILD WHAT YOUR LOOKING FOR WITH OUT HAVING YOUR PROJECT IN THE SHOP

CALL LUKE FOR PRICING. THESE ARE NOT COOKIE CUTTER PARTS. THERE IS ALOT OF PROGRAMING GOES INTO THESE EVEN BEFORE THEY ARE CUT AND WELDED

***MAKE SURE YOU CHECK OUT ALL THE PICS ON THE MAIN 4 LINK

PAGE ON THE BOTTOM***

RBC SWAY BARS KITS CALL TODAY 810-650-8641. WE USE THE SAME PARTS THAT ARE ON YOUR FAVORITE MONSTER TRUCKS

SCS SWAY BAR KITS

KIT #1: (2 SWAY BARS).... (1) 2 1/8" DIAMETER FOR THE ENGINE END OF TRUCK & (1) 1 3/4" DIAMETER . BOTH BARS ARE SPLINED & THREADED ON THE ENDS FOR OPTIMUN ARM CLOCKING POSITIONS. THIS ALSO COMES WITH 4 MOUNTING BLOCKS FOR THE FRAME, & 4 TUBE SLEEVES TO MAKE YOUR OWN ARMS (NO LINK RODS OR TABS INCLUDED FOR KIT)

$1400.00 PLUS SHIPPING

KIT #2: SAME AS ABOVE BUT INCLUDES (4) ARMS THAT YOU CAN CLOCK IN ANY POSTION

(ADD $375.00 PER ARM OR $1500.00 FOR 4)

SWAY BARS ARE AVAILIBLE UP TO 44" IN LENGTH

ARM LENGTH- CHOICE OF SEVERAL LENGTHS

CALL 810-650-8641

ASK FOR PARTS OR SERVICE

*ALL PRICE'S SUBJECT TO MARKET CHANGE*