***BEFORE ORDERING YOUR OUVERSON PARTS

PLEASE CALL US FOR AVAILIBILITY***

DUE TO THE HIGH DEMAND FOR

THESE AFTER MARKET PARTS

*** TECH TIP ***

PINION BRAKE'S CAN NOT BE USED AT ROAD SPEED BECAUSE THE BRAKE ROTOR IS TURNING @ 7 TIMES THE SPEED OF 1 REVOLUTION OF THE WHEEL. IT WILL WORK A FEW TIMES BUT WILL GET TO HOT AND MELT DOWN, THEN FAIL. THIS WILL CAUSE A TOTAL LOSS OF BRAKES.

2.5 TON ROCKWELL 

RBC PINION PLATE

KEEP THE MUD OUT OF YOUR OPEN FLANGE. THIS PLATE WILL GIVE IT A CLEAN LOOK @ GOOD PRICE. KIT COMES WITH ALL NEW GRADE 8* HARDWARE.

BARE STEEL, RED, BLACK

$47.50 EACH

2.5 TON ROCKWELL 

OUVERSON'S PINION SHREDDER

THIS IS CNC BILLET ALUNIMUM COMES RED, BLACK, BLUE (NOT SHOWN)

$95.00 EACH

WE HAVE 1 USED RED SHREDDER IN STOCK $50.00

WE RECOMMEND THAT YOU USE THESE CUSTOM BRAKE LINES AND FITTINGS. THE MOST COMMON SIZES ARE

DASH 3 AND DASH 4 

RBC STAINLESS STEEL

BRAKE LINES & FITTINGS

COMES IN SEVERAL DIFFERANT SIZE'S & LENGTH'S

CALL FOR PRICE'S TO MANY TO LIST

(OFF ROAD USE ONLY)

*** 2.5 TON ROCKWELL PINION BRAKE SECTION ***

RBC STANDARD 4 PISTON CALIPER PINION WITH 11 3/8" DIAMETER ROTOR BRAKE KIT

BRAKE HOSE 10MM X 1.50 MM

THIS WILL VARY FROM MANUFACTURE COULD BE 1.00 MM OR 1.75 MM ALSO PLEASE CHECK YOURS

KIT WITH ALL BRACKETS, PADS, CALIPER, ROTOR $275.00

GRADE 8* BOLT KIT $25.00

SHORT 7" RUBBER BRAKE HOSE $18.43

BRACKETS NOT SOLD SEPERATE

RBC 2.5 TON ROCKWELL

4 PISTON "WILWOOD" PINION BRAKE KIT

BRAKE HOSE SIZE

PINION OR DRIVE SHAFT BRAKE KIT $375.00

ADD $40.00 FOR SCALLOPED ROTOR IN KIT

GRADE 8* BOLT KIT $25.00

BRACKETS NOT SOLD SEPERATE

NOTE: THIS WILWOOD ROTOR, CALIPER, & BRAKE PADS ARE A DIFFERANT & A SMALLER VERSION OF THE WHEEL BRAKE KITS. 

BRACKETS NOT SOLD SEPERATE 

RBC 2.5 TON ROCKWELL WILWOOD PINION BRAKE KIT

WITH THE SCALLOPED/DRILLED ROTOR $415.00 EACH

COMPLETE KIT WITH ALL BRACKETS AND ADAPTOR

(SAME KIT AS ABOVE BUT WITH BETTER ROTOR)

OUVERSON 4 PISTON CALIPER PINION BRAKE OR DRIVE LINE BRAKE

COMES IN RED, BLACK, OR BLUE

$525.00 EACH

CALL FOR REPLACEMEMNT PART PRICES

2.5 TON ROCKWELL WHEEL BRAKE SECTION

GHE 2.5 TON ROCKWELL WHEEL BRAKE KIT WITH 12" "WILWOOD" ROTOR & ONE OR TWO "WILWOOD 4 PISTON CALIPERS" PER WHEEL

STEER AXLE KIT (W/1) 4 PISTON CALIPER $1304.96 OR (W/2 4 PISTON CALIPERS $1613.95

STRAIGHT AXLE (W/1) 4 PISTON CALIPER $1304.96 OR (W/2 4 PISTON CALIPERS $1613.95

REPLACEMENT ROTORS SPECIFY RH OR LH $67.97

REPLACEMENT CALIPERS $159.00 EACH

REPLACEMNT BRAKE PADS $89.99 SET OF 2 PADS

"THIS BRAKE SET UP CAN USE A 17" AND SOME 16.5" DIAMETER WHEELS"

GHE 2.5 TON 15" DIAMETER ROTOR WITH LARGE 2 PISTON CALIPER

(5 TON MODEL SHOWN IN PIC) MUST USE 20" DIAMETER RIM FOR CLEARENCE

STEER AXLE KIT $1590.00

STRAIGHT AXLE KIT $1450.00

CTS BRAKE KIT WITH 15 1/4" DIAMETER ROTOR WITH LARGE OFF SET WITH LARGE BORE SINGLE PISTON CALIPER WITH WELD ON/BOLT ON BRACKETS. YOU CAN USE 15" DIAMETER RIM WITH AT LEAST 4 1/2" OF BACK SPACE. KIT COMES WITH NEW LONGER STUDS. (LUG NUT NOT INCLUDED WITH KIT'S)

WE MUST HAVE YOUR HUBS FOR CORES TO MACHINE EVERYTHING TO FIT. OR YOU CAN BUY OUR MACHINED HUBS

STEER AXLE $1050.00 THIS INCLUDES THE 2 WELD ON BRAKETS FOR YOUR STEERING KNUCKLES

STRAIGHT AXLE $850.00 THIS INCLUDES THE 2 BOLT ON BRACKETS TO THE FACTORY BRAKE BACKING PLATE FLANGE'S

STEER & REAR KIT PRICE'S INCLUDE THE MACHINE WORK TO THE ROTORS & YOUR HUBS. 

USED HUBS WITH MACHINE WORK $300.00 EACH

OUVERSON CNC ALUNIMUM 8 LUG PATTERN CONVERSION KIT

(4)CNC ALUNIMUM HUBS (EACH HUB COMES WITH ALL NEW STUDS AND BEARING RACES),

(4) CNC ALUNIMUM 6 PISTON WILWOOD CALIPERS,

(4) DRIVE FLANGES (CUSTOM TO THE SUPER 8 HUBS ONLY....RED, BLUE, BLACK, OR NICKLE FINISH), ALL MOUNTING BRACKETS FOR 1 STEER FRONT AND 1 STRAIGHT REAR AXLES,

(2) REAR AXLE SHAFTS (STOCK AXLE SHAFTS CAN NOT BE USED THEY HAVE TO BE SPLINED ON BOTH ENDS TO WORK WITH THE KIT)

STEER AXLE BRAKE KIT $1300.00 

REAR STRAIGHT AXLE KIT $1350.00

(2) 16 SPLINE REAR AXLE SHAFTS FOR 8 LUG HUBS $450.00

(4) CNC SUPER 8 ALUNIMUM HUBS $2000.00

COMPLETE 8 LUG CONVERTION      

CALL 810-650-8641 SHOP LINE

ASK FOR PARTS OR SERVICE 

*ALL PRICE'S SUBJECT TO MARKET CHANGE*