***BEFORE ORDERING YOUR OUVERSON PARTS

PLEASE CALL US FOR AVAILIBILITY***

DUE TO THE HIGH DEMAND FOR

THESE AFTER MARKET PARTS

THIS IS OUR RBC "PUNISHER" STEER HOUSING WITH FRONT & LOWER AXLE TRUSS MADE OUT OF 3/8" STEEL PLATE. WE HAVE SEVERAL VERSIONS OF THIS DESIGN, PLEASE CALL TODAY FOR PRICING...

810-650-8641 SHOP LINE....ASK FOR PARTS OR SERVICE

TECH TIP:

THE STOCK STEER AXLE CONFIGURATION IS THE PINION IS ON THE PASSENGER SIDE AND THE STEERING TIE BAR IS BEHIND THE AXLE.

WITH THE TOP LOADERS (ONLY) YOU CAN RUN THE PINION ON THE DRIVERS OR PASSENGER SIDE, HAVE THE TIE BAR FRONT OR REAR (THE KNUCKLES WORK ON BOTH SIDES). YOU CAN EVEN FLIP THE CHUNK AROUND 180* AND THE TRUCK WILL STILL GO FORWARDS.

TO MAKE THE TOP LOADERS WORK ON A REAR ENGINE TRUCK, YOU NEED TO HAVE A SCS OR PRO FAB REVERSER TRANSFER CASE, AUXILERY V-DRIVE IN FRONT OF YOUR T-CASE OR HAVE US MACHINE 2 CHUNKS TO BECOME REVERSE ROTATORS. 

"NONE OF THESE OPTIONS ARE CHEAP OR FAST TO GET DONE."

****WE HAVE A LOT OF PRIDE AND WORKMAN SHIP AT RED BARN CUSTOMS, ALL OF THESE AXLE BUILDS ARE CUSTOM BUILT TO YOUR SPECS. THERE IS A TREMENDOUS AMOUNT OF TIME, PARTS, AND LABOR THAT GOES INTO EVERY ONE OF THESE.****

"LUKE MUD WALKER"-OWNER OF RED BARN CUSTOMS L.L.C. EST 2006

THIS IS JARROD WARNER'S YUKON (OWNER OF BIG SHOCKS.COM) HE PURCHASED OUR DELUXE AXLE SET WITH THE 2" OUVERSON KITS WITH THE VIOATOR U-JOINTS & STUD GIRDLES. ALSO 1 OFF CUSTOM 24" X 15" RIMS

THIS IS RAY MONARCH'S PROJECT. RAY PURCHASED THE RBC DELUXE AXLE SET WITH OUR 4" OFF SET HELMETS AND 2 OF OUT STANDARD PINION BRAKE BRAKE PAINTED BLUE TO MATCH HIS COLOR SCHEME. RAY ALSO HAS A SET OF OUR CUSTOM 24" RIMS THAT ARE 1 OFF'S (HIS SPLASH/TEAR DROP DESIGN)

2.5 TON ROCKWELL

TAKE OUT SET

(AS IS-OUT OF 6X6 TRUCK WITH BRAKE DRUMS)

1 STEER/ 1 STRAIGHT (SET PRICE) $1700.00

1 STEER $1500.00 EACH

2 STEERS $3000.00 PAIR

1 STRAIGHT REAR $650.00 EACH

(DE-BRAKED AXLE SHOWN: THIS IS EXTRA $150.00 PER AXLE)

RBC DELUXE 2.5 TON

ROCKWELL AXLE SETS

DELUXE STEER AXLE: INCLUDED COMPLETE TEAR DOWN, POWER WASH INSIDE/OUT, STOCK U-JOINT AXLE SHAFTS, ALL NEW PAPER GASKETS, NEW SEALS, NEW BOOTS (8 STYLES) NEW LARGE AND SMALL CLAMPS, DRUM BRAKES REMOVED CLEANLY, SAND BLASTED, EPOXY PRIMED, AND YOUR CHOICE COLOR OF PAINT. GRADE 8* BOLT UPGRADES ON THE SPINDLES, CHUNK BASE  $2000.00 EACH

DELUXE STRAIGHT REAR AXLE: INCLUDED COMPLETE TEAR DOWN, POWER WASH INSIDE/OUT, STOCK AXLE SHAFTS, ALL NEW PAPER GASKETS, NEW SEALS, DRUM BRAKES REMOVED CLEANLY, SAND BLASTED, EPOXY PRIMED, AND YOUR CHOICE COLOR OF PAINT. GRADE 8* BOLT UPGRADES ON THE CHUNK BASE $1200.00 EACH

DELUXE UPGRADE OPTIONS

INSTALL ANY TYPE OF TRACTION DEVICE ON A RBC AXLE, IF YOU BUY IT AT THE SAME TIME AS YOUR AXLE BUILD WE WILL INSTALL IT FOR FREE

STEER AXLE: (REAR STRAIGHT AXLES SAME PRICE)

12 ALL NEW RH/LH LUG NUTS & 12 ALL NEW RH/LH STUDS $120.00 INSTALLED FOR FREE

FLIP FRONT HUBS INWARDS $100.00 PER HUB

FLIP REAR STRAIGHT AXLE HUBS OUTWARDS....NO CHARGE FREE

SHORTEN LONG SIDE DOWN BY 7" $250.00

SHORTEN FACTORY TIE BAR TO MATCH SHORTENED STEER HOUSING $50.00

MOHAWKED LOWER BOWL $375.00 PARTS/LABOR

ROTATE CHUNK 180* (CENTERS PINION SHAFT-STEER ONLY) $150.00

STRAIGHTEN HOUSING COMPLETE TAKING OUT THE 12* OF FACTORY BEND $350.00 (THIS IS A MUST FOR 2" OUVERSON SHAFTS AND STOPPING THE TOPS OF LARGE TRACTOR TIRES FROM LEANING WAY OUT AT THE TOP)

SAME JOB AS ABOVE PLUS SHORTEN HOUSING 7" ADD $100.00

UPGRADE SHAFTS TO 16 OR 47 SPLINE CHROME MOLYS AND WE WILL GIVE YOU ALL YOUR OLD PARTS BACK OR CREDIT YOUR BILL FOR THE PARTS THAT WE TOOK OFF.

INSTALL BOTTOM AXLE TRUSS KIT $125.00 (THIS IS BEST DONE WHEN AXLE IS 100% APART AND STRAIGHTENING JIG IS INSTALLED)

3/8" STEEL BOTTOM SIDE AXLE TRUSS KIT $125.00

INSTALL FRONT OR BACK SIDE AXLE TRUSS KIT $125.00 (THIS IS BEST DONE WHEN AXLE IS 100% APART AND STRAIGHTENING JIG IS INSTALLED)

3/8" STEEL FRONT OR BACK SIDE AXLE TRUSS KIT $125.00

MACHINE FRONT SPINDLES FOR 2" AXLE SHAFTS AND PRESS IN NEW BUSHING $75.00 EACH

MACHINE STRAIGHT REAR HOUSING SPINDLES (BOTH SIDES) $250.00 (EMPTY HOUSING)

MACHINE STRAIGHT REAR HOUSING CAST BRAKE BRACKETS DOWN TO CLEAN ROUND LOOK $100.00                  

 (EMPTY HOUSING ALL READY CUT DOWN)

FOR ANY TYPE OF BRACKETS, STEERING, OR BRAKES CALL FOR PARTS & LABOR QUOTE

GHE 2.5 TON/5 TON ROCKWELL

HYBRED COMPLETE AXLE ASSEMBLIES

THESE AXLES ARE THE 2 PICTURES ABOVE WITH GREY PRIMER

GHE 2.5 TON/5 TON HYBRED WITH 5 TON ROCKWELL HUBS STARTING OFF @ $5000.00 COMES WITH LOCKER OR SPOOL

CALL THE RBC SHOP TODAY @ 810-650-8641

SHOP LINE ASK FOR PARTS OR SERVICE

GHE 2.5 TON/5 TON HYBRED WITH 2.5 TON ROCKWELL HUBS STARTING OFF @ $5500.00 COMES WITH LOCKER OR SPOOL CALL 

AXLE SHAFT UPGRADE FOR THE HYBRED WITH 2.5 TON HUBS ADD $1200.00

BOTH OF THESE AXLES HAVE ALOT MORE OPTIONS THAT ARE STANDARD PLEASE CALL FOR DETAILS

*ALL PRICE'S SUBJECT TO MARKET CHANGE*